Home ›
Products ›
ECO-LED-6103

ECO-LED-6103

IP20

3″ Round LED Downlight Housing Kit

The ECO-LED-6103 is a compact 3-inch LED downlight housing kit for small cutout openings. The heatsink is die-cast aluminum and the trim ring is forged aluminum – thinner, stronger and cooler to the touch than stamped trims. Shipped as SKD parts for local assembly.

Specifications

General

For Hotels, Corridors & Compact Ceilings

With face diameters from 62 to 82 mm and cutouts from 55 to 75 mm, the 6103 fits hotel rooms, corridors and small office ceilings where space is tight. Power options from 9W to 15W cover most general-lighting layouts.

Forged Aluminum Trim, Steady Heat Path

The forged aluminum trim ring conducts heat away from the front face, while the die-cast heatsink pulls heat from the COB and driver. Beam angles of 15/24/36 degrees keep light where you want it.

Import Duty Savings on the 6103 SKD Kit

Because the 6103 ships as a housing kit – without the LED and driver – it typically clears customs at a lower duty rate than a finished luminaire in many markets. Your local factory completes assembly, which also shortens last-mile delivery to your project sites.

Works with Your Own COB & Driver

You are never locked into one supplier. The 6103 accepts almost any COB LED and driver that matches the wattage – tell us your driver brand and model and we will confirm fit. OEM/ODM with custom packaging is available.

Key Features

• Compact design for small cutout openings (55-75 mm)
• Forged aluminum trim ring – thinner and stronger than stamped
• Die-cast aluminum heatsink for steady heat dissipation
• Lens beam angles: 15° / 24° / 36°
• SKD kit: housing + optical parts + springs
• Sand white / sand black trim, MOQ from 50 sets

Request Quote
Get Samples

ECOLEDKIT 6103 — Technical Specifications

Q: What driver fits the ECO-LED-6103?

A: Almost any LED driver that matches the wattage works. Tell us your driver brand and model and we will confirm fit.

Q: Does the kit include the LED and driver?

A: No – it ships as an SKD kit with housing, optical parts and springs, so you install your own COB LED and driver.

Q: What cutout sizes does it fit?

A: Cutout range is 55 至 75; tell us your project size and we will confirm the right option.

Q: What beam angles are available?

A: 15° / 24° / 36°. Interchangeable lenses keep your stock simple.

Q: What is the MOQ?

A: MOQ is 100 pcs per size. For a first trial order, 50 pcs is also acceptable.

Q: How long is the lead time?

A: We keep partial stock – most orders ship in 5 days (fastest 3 days). For large quantities, the lead time is negotiated case by case.

Why Choose the ECO-LED-6103 Downlight Housing?

In commercial lighting, the housing decides how long your COB and driver survive. A body that cannot shed heat makes the module run hot: lumen output drops and drivers fail early. The ECO-LED-6103 is built from Heatsink: Die-cast Aluminum so heat leaves the COB fast, even in the hot, humid climate of Southeast Asia.

We supply it as an SKD kit – unassembled parts in a compact carton, finished by your local factory. You get two practical benefits: lower import cost per unit, and faster delivery to your project sites. We already ship these kits to lighting assemblers and importers in 50+ countries.

With 9W to 15W and cutouts of 55 – 75, the ECO-LED-6103 covers the most common downlight openings. Spring clips make installation a two-minute job, and the housing works with almost any driver that matches the wattage, so you are never locked into one supplier.

Request a free sample – WhatsApp +86 132 4938 9989 or send an inquiry. 50+ countries served.

• → led-downlight-housing-cutout-size-guide
• →commercial-lighting-skd
• →what-is-skd-led-downlight-housing-kit-complete-guide
• →housing-kit-save-import-duties
• → ECO-LED-6103A — 3″ Round LED Downlight Housing Kit